From slip to container.
One site, one firing curve, one quality standard. This is how a Donghong order is actually made — and where you can intervene.
Four stages, one address.
Because casting, glazing and firing sit on the same site, a problem found at the kiln exit can be traced back to a mould or a glaze batch the same day.
Slip & casting
Body slip is prepared in-house and cast in high-pressure cells, then trimmed, drilled and assembled by hand.
Glaze
Robotic glazing with glaze recovery; colour is matched against a retained standard, not against a photograph.
Firing
Continuous gas tunnel kiln with a controlled curve, so every piece in the batch sees the same thermal history.
Test & pack
Water test, visual grading, seat fitting, then automatic carton sealing and palletising for the container.
Where defects are stopped.
Four inspection gates. A piece that fails any of them does not reach a carton, and the reason is logged against the mould and the batch.
| Gate 1 — Body | Dimension check against drawing, crack and warp inspection after trimming. |
|---|---|
| Gate 2 — Glaze | Coating weight, colour against retained standard, pinhole and crawl inspection before firing. |
| Gate 3 — Firing | Visual grading for crazing, shade and deformation; kiln curve logged per batch. |
| Gate 4 — Function | 100% water test: flush volume, vortex pattern, siphon refill and trapway clearance. |
| Pre-shipment | Packing check, carton drop test, quantity and shipping-mark verification with photo report. |
Your brand on our body.
Private label is the default for our export customers, not an exception. Here is what we can put your name on.
Logo & seat label
Laser or pad-printed logo on the body, woven or printed label on the seat, your model naming on the carton.
Glaze & finish
White as standard; bone, ivory, matt and selected RAL matches on request, subject to minimum batch.
Carton & marks
Printed cartons, barcodes, manuals and shipping marks to your artwork, with a pre-production proof before the run.
ODM adaptation
Seat, hinge, flush valve and trapway combinations adapted from existing moulds to hit a price point or a market standard.
Heavy, fragile, and on time.
A 40ft HQ holds roughly 400–500 toilet units depending on mix and packing. We plan the load before we quote the freight, not after.
Shantou · Shenzhen
- TermsFOB Shantou or Shenzhen. CIF, CFR and DDP quoted on request.
- Mixed loadsToilets, basins and utility ceramics combined in one container with a loading plan per SKU.
- PackingMoulded EPS, double-wall carton, corner protection; cartons drop-tested for sea freight.
- DocumentsInvoice, packing list, B/L, CO and test reports issued within the sailing week.