Manufacturer since 2013 · Chaozhou, China OEM & ODM welcome
Export enquiries: sales1@donghongceramics1.com
DH Donghong Ceramics · 东宏陶瓷
Capabilities

From slip to container.

One site, one firing curve, one quality standard. This is how a Donghong order is actually made — and where you can intervene.

1Continuous gas tunnel kiln
4Inspection gates per piece
100%Water test before packing
25–35Days typical production lead time
Production flow

Four stages, one address.

Because casting, glazing and firing sit on the same site, a problem found at the kiln exit can be traced back to a mould or a glaze batch the same day.

01

Slip & casting

Body slip is prepared in-house and cast in high-pressure cells, then trimmed, drilled and assembled by hand.

02

Glaze

Robotic glazing with glaze recovery; colour is matched against a retained standard, not against a photograph.

03

Firing

Continuous gas tunnel kiln with a controlled curve, so every piece in the batch sees the same thermal history.

04

Test & pack

Water test, visual grading, seat fitting, then automatic carton sealing and palletising for the container.

Quality control

Where defects are stopped.

Four inspection gates. A piece that fails any of them does not reach a carton, and the reason is logged against the mould and the batch.

Gate 1 — BodyDimension check against drawing, crack and warp inspection after trimming.
Gate 2 — GlazeCoating weight, colour against retained standard, pinhole and crawl inspection before firing.
Gate 3 — FiringVisual grading for crazing, shade and deformation; kiln curve logged per batch.
Gate 4 — Function100% water test: flush volume, vortex pattern, siphon refill and trapway clearance.
Pre-shipmentPacking check, carton drop test, quantity and shipping-mark verification with photo report.
Dye flush test showing vortex pattern in a toilet bowl
OEM & ODM

Your brand on our body.

Private label is the default for our export customers, not an exception. Here is what we can put your name on.

01 — BRANDING

Logo & seat label

Laser or pad-printed logo on the body, woven or printed label on the seat, your model naming on the carton.

From 1 container
02 — COLOUR

Glaze & finish

White as standard; bone, ivory, matt and selected RAL matches on request, subject to minimum batch.

Batch minimum applies
03 — PACKAGING

Carton & marks

Printed cartons, barcodes, manuals and shipping marks to your artwork, with a pre-production proof before the run.

Proof before production
04 — DEVELOPMENT

ODM adaptation

Seat, hinge, flush valve and trapway combinations adapted from existing moulds to hit a price point or a market standard.

Mould tooling quoted separately
Loading & shipping

Heavy, fragile, and on time.

A 40ft HQ holds roughly 400–500 toilet units depending on mix and packing. We plan the load before we quote the freight, not after.

Container ship loaded at berth Shantou · Shenzhen
  • TermsFOB Shantou or Shenzhen. CIF, CFR and DDP quoted on request.
  • Mixed loadsToilets, basins and utility ceramics combined in one container with a loading plan per SKU.
  • PackingMoulded EPS, double-wall carton, corner protection; cartons drop-tested for sea freight.
  • DocumentsInvoice, packing list, B/L, CO and test reports issued within the sailing week.
Factory visit

Come and see the line, or send an inspector.